- Features
- Specs
- Testing
- Reviews
- FAQ
Features for the Medium Duty 5.6" LCD Monitor Single Camera System
AOM562HD - 5.6" Medium Duty Rear View LCD Monitor with 2 Camera Inputs:
- Diagonal Screen Size (Inch): 5.6
- Aspect Ratio: 4:3
- Resolution: 960 x 234
- Brightness (cd/m2): 500 nit
- Contrast Ratio: 250:1
- Viewing Angles (V/H): 80/100
- Power System: 12V
- Camera Inputs: 2
- Screen Capabilities: Single
- Triggers: Two 12V
- Slimline Profile
- Built-in Speakers
- Backlit Controls: No
- NTSC Compatible
- Overall Dimensions: 5-7/8"W x 5-1/4"H x 1-1/4"D
VBCS150 - Voyager Rear View CCD B/W Camera:
- Camera Type: CCD
- Camera Housing Color: White
- Power System: 12 Volt DC
- Waterproof (IPX7)
- Viewing Angle (degree): 150
- IR LED Low Light Enhancement
- Built-in Microphone
- NTSC/PAL Compatible
- Sensor (Inches): 1/3
- Shutter: Electronic Iris
- Normal/Mirror Image Orientation
- Machined Aluminum Body
- Overall Dimensions: 2.7"W x 1.7"H x 5"D
CEC34 - Voyager 34ft. Camera Extension Cable:
- 34ft. cable connects camera and monitor and has non-corrosive locking connectors
72704 - 4" Universal Pedestal Mount:
- Pedestal is solid cast/machined aluminum
- Thumbscrew adjustable knuckle at midpoint
- Universal 4-hole mounting pattern mates with Voyager LCD monitors
- Matte black finish
Specifications for the Medium Duty 5.6" LCD Monitor Single Camera System
| Weight (Lbs) |
4.5 |
|---|
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN & Voyager products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Audio & Video products and Voyager Camera Systems offer MORE durability and performance than you would expect from standard electronics.
Product FAQs
-
Can I view my rear camera while driving down the road or is it only visible while in reverse?Yes, you can view the camera when you are not in Reverse by operating in manual mode. See monitor's manual for instructions.
-
I have a color LCD monitor, but my image is in black & white. Why?
Most likely, the camera is a black and white model. Check the model of the camera to confirm capabilities.
-
Do I need to connect the "Trigger" wires if I don't need the cameras to turn on with my turn-signals or back-up lights?No, you do not need to connect the Trigger wires in this case. In doing so, your monitor will always be in manual mode.
