- Features
- Specs
- Testing
- Reviews
- FAQ
Features for the SIRIUS 10ft. Replacement Data Cable
This Cable is for use with SIRIUS Satellite Gen 3.0 Radio Ready JENSEN Stereos ONLY.
Compatible JENSEN Stereos are:
- JHD1510 - All Revisions
- JHD3510 - All Revisions
- MSR180 - All Revisions
- MSR2007 - REV. D & Later
- MSR3007 - REV. D & Later
- MSR3007BRP - REV. D & Later
- MSR3007RTL - REV. D & Later
- MSR3007TMG - REV.C & Later
- MSR7007 - All Revisions
- VR182 - REV. E Only
- VR182G3 - All Revisions
- VR182G3BKWIN - All Revisions
- VR182G3SVWIN - All Revisions
The stereo REV Level can be found on the chassis label on the back of your stereo.
Specifications for the SIRIUS 10ft. Replacement Data Cable
| Weight (Lbs) |
0.3 |
|---|
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN & Voyager products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Audio & Video products and Voyager Camera Systems offer MORE durability and performance than you would expect from standard electronics.
Product FAQs
-
Since SIRIUS and XM merged, can I use XM tuners in place of SIRIUS tuners?
While SIRIUS and XM have merged, they operate different broadcasts and are separate services. The tuners are not interchangeable.
-
My radio is SIRIUS-ready. Where do I find the ESN#?
The ESN# (SID#) is located on the SIRIUS tuner (sold separately). This # can be accessed through the radio's display when connected to the SIRIUS tuner. See the radio's manual for instructions.
-
My radio says it is SIRIUS-ready. Why can't I get SIRIUS to work?
SIRIUS-ready radios require a separate SIRIUS tuner module and SIRIUS antenna as well as a subscriptoin to SIRIUS Satellite Radio service.
-
What is the code for your TVs that will work with my DirecTV/Dish Network/Universal remote?Please see Universal Remote Control bulletin under Support tab.
-
Can I view my rear camera while driving down the road or is it only visible while in reverse?Yes, you can view the camera when you are not in Reverse by operating in manual mode. See monitor's manual for instructions.
-
I have a color LCD monitor, but my image is in black & white. Why?
Most likely, the camera is a black and white model. Check the model of the camera to confirm capabilities.
-
Do I need to connect the "Trigger" wires if I don't need the cameras to turn on with my turn-signals or back-up lights?No, you do not need to connect the Trigger wires in this case. In doing so, your monitor will always be in manual mode.
-
My MWR100 lights up and operates, but the display does not show any text. What is wrong?The MWR100 is designed for use with JENSEN SIRIUS-ready radios only. Use of this remote with a JENSEN radio that is not SIRIUS-ready will result in no information on the display.
-
The radio has four speaker outputs, but I only have two speakers. Can I combine or "bridge" the four outputs into two for more power?
It is not recommended to combine or "bridge" the outputs as damage will occur. Use only the Front or Rear pair and insulate the unused wires to prevent a short. Use of an external power amplifier is recommended for applications requiring more power.
-
When I insert a CD/DVD, it won't play and/or ejects immediately. What is wrong?
The shipping screw is most likely still installed. Inspect the area over the dsc drive and remove the transport screw if found.
