- Features
- Specs
- Manuals & Guides
- Testing
- Reviews
- FAQ
Features for the JENSEN AM/FM/CD/DVD/WB/USB Wallmount Stereo
- 12V DC Power
- 132 Watts
- AM/FM Electronic Tuner (US/Euro)
- Aux A/V in (front and rear)
- 2 Composite video outputs
- 3 Zone (A, B, C) Speaker Output
- Front USB input supports MP3/WMA/JPEG formats
- Front Panel Headphone Out (1/8” Jack)
- Fully suspended slot-type DVD deck mechanism
- 30 Programmable Station Presets (18FM, 12AM)
- Clock with Sleep Timer
- Alarm Clock
- Low, medium and high adjustable LCD dimmer setting
- External IR repeater input
- Wireless Remote Included
- Dimensions: 10-7/16"W x 7"H x 5"D
The AWM970 can easily replace your Concertone stereo by using our retrofit cable (31100133), simply plug and play!
Specifications for the JENSEN AM/FM/CD/DVD/WB/USB Wallmount Stereo
| Weight (Lbs) |
5.5 |
|---|---|
| Maximum Power Output (Watts x Channel) |
22.5 x 4 |
| Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB) |
79 |
| Mounting Hole Dimensions (Inches WxH) |
9.30 x 5.11 |
| Watertight Standard Compliant |
No |
| Conformal Coated PCB |
No |
| Plastic PCB Insulator |
No |
| Chassis |
In-Wall |
| iPod Ready |
No |
| Gen3.0 SIRIUS Satellite Radio Ready |
No |
| Wired Remote Control Ready |
No |
| Wireless Remote Control Ready |
No |
| Positive LCD Display |
Yes |
| CD/CD-R/CD-RW Playback |
Yes |
| MP3/WMA Playback |
Yes |
| AM/FM Tuner |
Yes |
| Selectable AM/FM Frequency Spacing US/European |
Yes |
| USB Input |
Yes |
| 1GB Onboard Memory |
No |
| Auxiliary Audio Input |
No |
| Preamp Line Level Outputs |
No |
| Electronic Disc Skip Protection (Seconds) |
DVD - 5, CD Audio - 15, CD MP3 - 40 |
| Radio Broadcast Data System Text Display |
No |
| Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND) |
No |
| NOAA Weatherband/Weather Alert |
Yes |
| ASTM B117 Salt Spray Exposure Standard Compliant |
No |
| ASTM D4329 UV Exposure Standard Compliant |
No |
Manuals & Guides for the JENSEN AM/FM/CD/DVD/WB/USB Wallmount Stereo
Product Downloads
 |
AWM970 Owners Manual (Size: 3.2 MB) |
Troubleshooting Guides
|
AWM970 Troubleshooting Guide (Size: 95.6 KB) |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN & Voyager products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Audio & Video products and Voyager Camera Systems offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
Pushbutton/Hinge/Mechanism Durability Cycle
Life cycle robotic testing of all buttons and hinge mechanism for durability.
RF Performance Testing
RF performance is central to the user experience for many of our products. The RF Performance test ensures that our products keep clean signals in and the bad signals out, so that users are always left with a steady signal without outside interference. We not only test for high level RF performance during product design, but we also take a random sampling from each production lot and test it to ensure performance consistency. A battery of over 80 performance tests are conducted to analyze and validate RF and audio performance.
