- Features
- Specs
- Testing
- Reviews
- FAQ
- Media
Features for the JENSEN 7" LCD Bus Monitor
- 7” Widescreen LCD Monitor
- 12 VDC power
- Operating Voltage: 9~30 VDC
- Aspect Ratio: 16:9
- Resolution: 480 x 234
- Brightness (cd/m2): 500 nit
- Contrast Ratio: 300:1
- Viewing Angles: 100/120
- Backlight: 20,000 hours
- 1 video NTSC/PAL input (RCA type)
- Injection molded housing
- Wide viewing angles
- Energy efficient white LED backlight
- Lexan protective screen cover
- No external controls on monitor
- Gray low gloss ABS plastic housing
- Auto power on (video detection) circuitry
- Simple installation
- Overall Dimensions: 8.875”W x 7.1875”H x 6.625”D
Specifications for the JENSEN 7" LCD Bus Monitor
| Weight (Lbs) |
3 |
|---|---|
| Overall Dimensions |
8.875”W x 7.1875”H x 6.625”D |
| Diagonal Screen Size (Inches) |
7 |
| Aspect Ratio |
16:9 |
| Resolution |
480 x 234 |
| Brightness (cd/m2) |
500 nit |
| Contrast Ratio |
300:1 |
| Viewing Angles (V/H) |
100/120 |
| Power System |
12V |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN & Voyager products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Audio & Video products and Voyager Camera Systems offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
Electrostatic Discharge
The last thing you need is for your radio to quit due to accidental static shock. That’s why our products go through the extensive Electrostatic Discharge Test on all exposed control areas as well as I/O connections so they can withstand the most severe static build up. Shocking, isn’t it?
Load Dump
Severe electrical environments are relatively common mobile applications. We understand these environments and what it takes to protect electronics that will be exposed to them. That’s why all of our products include specific and significant front-end circuit protection and filtering that is proven to withstand the toughest electrical environments. The Load Dump Tests puts destructive pulses (spikes) to simulate the sudden disconnection of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction ensuring that our electronics are protected.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
High/Low Storage Temperature
Ensures your JENSEN products will perform even after prolonged periods of storage with no power in extreme hot or cold temperatures.
Temperature Cycle
Used to ensure powered components withstand temperature fluctuations.
Inductive Load Switching
Tests product well above and below the average waveform to ensure that it can withstand the extreme fluctuations.
Media
- Installation Pictures
